 | 德國朗博中國技術服務中心 |
19916557244
董小姐 （銷售）
- 電話：
- 021-50195005-8010
- 手機：
- 19916557244
- 售后電話：
- 18516048727
- 傳真：
- 021-50195005-8007
- 聯系我時，
- 告知來自化工儀器網
- 個性化：
- www.selichina.com
- 手機站：
- m.selichina.com
- 公司網站：
- www.selichina.com
在線溫度標定
閱讀：3313發布時間：2017-11-14
An increasing number of measurement points require confirmation of accuracy by regular calibration - a cost and time intensive procedure. However, for temperature measurement points with average or low accuracy requirements, a new technology opens up the possibility of significantly reducing the costs and in particular downtimes. The LABOM "In-process calibration" method with corresponding measurement equipment is suitable for all invasive temperature measurement points.
In this calibration concept, the measurement equipment is designed so that the comparison between measurement device and reference sensor can be performed in process („In-process calibration“). The certified reference sensor is inserted into a special calibration opening in the device.
This "In-process calibration" can reduce the calibration costs for measurements with average or low accuracy requirements and can be performed without production stoppages. An example application is the sterilisation with saturated water vapor (SIP).
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，化工儀器網對此不承擔任何保證責任。 溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
