E251 Motor Overtemperature Warning電機過熱警告
Description:說明：
As soon as the temperwature warning threshold (145°C) is exceeded,
warnig E251 is generated and the drive complies with the command
value.一旦超過溫度警告閾值（145°C），warnig E251生成，驅動器符合命令價值
This state can last infinitely without a powering down occurring.
這種狀態可以無限持續，而不會發生斷電。
Not until the temperature error threshold is exceeded will an immediate powering down take place.
直到超過溫度誤差閾值，才會立即斷電。
See also F219 Motor Overtemperature Shutdown
另請參閱F219電機過熱停機

Cause:原因：
The motor became overloaded.
電動機過載了。
The effective torque required of the motor was above the allowable standstill continuous torque for too long.
電機所需的有效扭矩超過允許的靜止連續扭矩太長時間。

Remedy:解決措施：
Check the installation of the motor.
檢查電機的安裝情況。
For systems which have been in use for a long time, check to see if the drive conditions have changed (inregards to pollution, friction, components which have been moved, etc).對于長期使用的系統，檢查驅動條件是否發生了變化（導致污染、摩擦、部件移動等）。

提供商	上海仰光電子科技有限公司	下載次數	4次
資料大小	105.1KB	資料類型	JPG 圖片 免費下載該資料
資料圖片	點擊查看	瀏覽次數	699次